What are the advantages of renting a cold regenerator? I believe most people don't understand the cold regenerator. Here is a brief introduction to Tuchang road and bridge.

1、施工工序簡單化。作為冷再生裝置的銑削刨削工作，舊的舊路面材料被銑削，在銑削和刨削中使用的廢料在混合室中直接混合和擴散。簡化了施工過程。

1. Simplify the construction process. As the milling and planing work of the cold regeneration device, the old pavement materials are milled, and the waste materials used in milling and planing are directly mixed and diffused in the mixing chamber. The construction process is simplified.

2、防止因道路施工而引起交通的堵塞。由于冷再生機在施工過程中省去了運輸和攪拌過程，施工現場投資相對較小。這有效地減少了由于道路建設造成的交通負荷。由于冷回?zé)崞魇窃谑┕?cè)施工的側馬路，所以可以選擇一半的施工，一半的道路維修，使道路可以修復，而不影響正常使用的交通。

2. Prevent traffic jams caused by road construction. Since the cold regenerator saves the transportation and mixing process in the construction process, the investment on the construction site is relatively small. This effectively reduces the traffic load caused by road construction. Since the cold regenerator is a side road constructed on the construction side, half of the construction and half of the road maintenance can be selected, so that the road can be repaired without affecting the traffic in normal use.

3、施工效率高。傳統的路面施工工藝是先用銑刨機將廢舊路面銑掉，然后將廢料輸送到攪拌站并混合。然后，將其運回施工現場并用攤鋪機鋪開，輥子由輥子卷起并形成。而局部冷回?zé)崞髟谑┕み^程中屬于一種成型（也就是銑刨、拌合、攤鋪在冷再生機一次通過需要修復的馬路后先后完成），它可以隨著施工進度的進行而打開道路竣工。它可以大大縮短維護路面和提前開放交通所需的時間。

3. High construction efficiency. The traditional pavement construction process is to mill the waste pavement with a milling machine, and then transport the waste to the mixing plant and mix it. Then, it is transported back to the construction site and spread with a paver, and the roller is rolled up and formed by the roller. The local cooling regenerator belongs to a kind of molding in the construction process (that is, milling, mixing and paving are completed successively after the cold regenerator passes through the road to be repaired at one time). It can open the road and complete the construction with the progress of construction. It can greatly shorten the time required to maintain the pavement and open the traffic in advance.

4、保護環境，節約能源和資源。由于冷再生機銑刨后，幾乎所有的廢料都可以直接送入拌合腔攪拌就地攤鋪利用，減少了新石料等材料的開采，不需要考慮運輸和堆垛的問題。廢棄材料。大大節約了資源，保護了環境。冷再生機不需要在工作中加熱和混合材料，節省了大量的能源。冷再生機是一種用來回收舊的廢棄道路材料的設備。沒有污染，所以我們稱之為綠色建筑技術。

4. Protect the environment and save energy and resources. After milling by the cold recycling machine, almost all wastes can be directly sent to the mixing chamber for mixing and paving on the ground, which reduces the mining of new stone and other materials and does not need to consider the problems of transportation and stacking. Waste materials. It greatly saves resources and protects the environment. The cold regenerator does not need to heat and mix materials in operation, which saves a lot of energy. Cold recycling machine is a kind of equipment used to recycle old waste road materials. There is no pollution, so we call it green building technology.

5、降低施工成本。與傳統的施工方法相比，冷再生機省去了許多設備、人員、材料等，相對成本較低

5. Reduce construction costs. Compared with the traditional construction method, the cold regenerator saves a lot of equipment, personnel and materials, and the relative cost is low

想要了解更多冷再生租賃及冷再生機的優勢相關知識介紹，歡迎關注我們網站，歡迎您的來電。

If you want to know more about the advantages of cold regeneration leasing and cold regeneration machine, please pay attention to our website and welcome your call.